FIRST QUESTION. 

NO I HAVENT I REALL HAVENT GOT THAT LUCK, BUT I WOULD LIKE TO BE IN A PHOTO WITH A CELEBRETY.

QUESTION 2.

I THINK IN THE FUTURE SOME PEOPLE WILL WORK FROM THEIR HOMES BECUASE ITS WHAT COMMUNICATION TECHNOLOGY IS FOR. BUT I AGREE WHEN IT IS SAID THAT PEOPLE WILL WORK FROM HOME.

QUESTION 3.

Obtaining wood:
Cutting of the trees and elimination of all branches, leaving only the main trunk.
Bark:
Elimination of bark from trees. This is equivalent to removing all the outer layer to leave only the wood of the trunk.
Bark grinding - Obtaining fiber:
Trunks are cut into small pieces for the sea easier to get the maximum of plant fibers in the latest chemical reactions.
Mixture with H2O - Obtaining paste:
Treatment based on chemical products forming a paste. This can be done in several ways and using various products, but one of the most economical in water, it is also common to use sodium magnesium sulfate. The intention of these products is the elimination of the undesirable fibers of the wood, as in the case of lignin, leaving only the cellulose that is the main responsible for the production of the paper.
Bleaching of pasta:
The paste as well as goes through other alternative processes such as washing, filtering, drying and some others until the bleaching process to obtain the desired tone.
Inclusion of Cl and O3
Introduction at the entrance table:
The thicker paste is placed on metal meshes that move, where the paper is re-formed little by little the paste dries and releases the water, which is the alternative to take advantage of its content of cellulose in other recovery stages, what help the development of more paper.
Smoothing of the pressed paper:
The paper obtains the desired thickness when passing between rotating rollers that besides being able to print some marks, depending on the manufacturer. Afterwards, the paper will be sent to the appropriate texture so that it is in charge of giving it the appropriate texture.
Drying:
Hot rolls are responsible for a final drying step.
Surface treatment:
Later they go through other cold rollers that give a final finish, in addition to change of brightness according to the type of paper. Normally a pre-coating is carried out as it passes through the calender.
Winding and cutting paper
Packaging
Transport

QUESTION. 4

I DO USE A WATCH, WHICH IS MADE OUT IN THE US.

QUESTION 5.

I WAS GIVEN MONEY.

Views: 13

Comment

You need to be a member of mudjob to add comments!

Join mudjob

© 2019   Created by Michael D. Brown.   Powered by

Badges  |  Report an Issue  |  Terms of Service